News Details
It is more suitable to buy a few tons of manual hydraulic transport vehicles
The marked load capacity of manual hydraulic handling vehicles is the peak load capacity. In actual use, if the load capacity of the forklift is reached, it is easy to cause damage, deformation, or excessive wear to the forks. In light of this, we recommend that the actual weight of goods frequently carried by manual forklifts should not exceed 70% -80% of the designed maximum load capacity. The Guanhang manual series handling vehicles are designed for light load capacity, and to extend their service life, it is recommended that the weight of goods frequently pulled should not exceed 800 kilograms.
For example, a 2-ton handling truck belongs to the lightweight type and is suitable for transporting light goods. For example, this type of handling truck can be used for goods weighing 500-800 kilograms; However, in order to reduce the damage caused by overloading to the handling vehicle, we usually recommend customers to purchase 2.5-ton or 3-ton handling vehicles.
In order to further enhance the carrying capacity of the transport vehicle, we have also equipped it with thick support tripods. Even slight overloading will not cause damage to the forks and wheels of the transport vehicle.
Customers can refer to the following data when purchasing manual hydraulic handling vehicles:
1.68 ton forklift: with a load capacity of 1680KG/suitable for pulling products weighing 300-500 KG
2.0-ton forklift: capable of carrying 2000KG/suitable for pulling products weighing 700-800 KG
2.5-ton forklift: capable of carrying 2500KG/suitable for pulling products weighing 1000-1500 KG
3.0-ton forklift: capable of carrying 3000KG/suitable for pulling products weighing 1500-2300KG
5.0-ton forklift: capable of carrying 5000KG/suitable for pulling products weighing 2500-4000KG